Samsung LED TV remote not working? How to fix all Samsung TV remote controls

Man holding a Samsung remote control, The best way to fix a faulty Samsung LCD/LED TV remote is to determine the root cause of the problem.

For example, you notice that the button does not respond to pressing.

The remote control also cannot be paired with the Samsung television or the IR sensor does not work.

SAMSUNG TV REMOTE NOT WORKING:

If you don't know what is causing the problem, it will be difficult for you to deal with it or fix it.

Technically, there are only four things that can cause your Samsung TV remote control to stop working properly. 

These include bad batteries, problems with the electronics in the device, a faulty Samsung remote control, and a faulty or ir sensor in the TV.

Samsung LED TV Remote 

To diagnose the problem, the first thing you need to do is check the battery.

Start by changing the batteries, cleaning the top edges of the Samsung remote control, and checking the connections.

If the issue persists, try one of these solutions.

WAYS TO FIX A SAMSUNG-LED TV THAT DOES NOT RESPOND TO THE REMOTE CONTROL:

If your Samsung TV is not responding to the remote control, follow these troubleshooting tips.

1. RESTART YOUR SAMSUNG TV:

Restarting the Samsung TV will update the system and allow you to start over.

PROCEDURE:

1. Turn off the TV.
2. Switch off the device.
3. Wait about 30 to 40 seconds.
4. Reconnect your TV.

2. DO A DIGITAL CAMERA TEST:

The digital camera test will help you determine if the infrared port on the remote control is working.

PROCEDURE:

1. Turn on your phone's camera.
2. Point the remote control at the camera lens.
3. Press the button on the Samsung TV remote control.

The infrared eye of the remote control should blink on the camera screen, indicating that the remote control is working.

If the remote control works, the problem is with the remote control sensor on the Samsung TV.

But if it does not work, then the remote control is faulty, consider a replacement.

HOW TO FIX A SAMSUNG TV REMOTE CONTROL SENSOR THAT IS NOT WORKING:

Fix problems with the remote control sensor by checking for obstructions between the remote control and the sensor on your Samsung TV.

If there is an object between them, it blocks the infrared signal.

You will also need to restart your Samsung TV and try again, following the steps mentioned above.

If you've taken these steps and the sensor isn't working, return the Samsung TV to the dealer if it's still under warranty.

If not, find a trusted specialist who specializes in Samsung TVs.

TROUBLESHOOTING SAMSUNG SMART TV TOUCHPAD REMOTE CONTROL:

Sometimes the touchpad on the Samsung Smart Touch remote control may lose its sensitivity.

The problem may be due to constant changes in the calibration level. The best way to fix this is to re-calibrate the Smart Touch remote control.

PROCEDURE:

1. Press and hold the number button for three seconds.
2. Calibration will start.
3. After calibration, the LED on the remote control will blink twice.

Do not touch the touch panel during the calibration process. In some cases, you may need to calibrate your touchpad from time to time if the issue persists.

However, if the remote does not work to its full potential, your best bet is to purchase a good replacement remote control that is compatible with your Samsung TV.

Also, you can use the Omaic universal remote control for all Samsung LCD/LED TVs.

HOW TO FIX A SAMSUNG REMOTE CONTROL THAT IS NOT PAIRED:

You can fix a Samsung TV remote control that won't pair by resetting it.

PROCEDURE:

1. Remove the batteries.
2. Try to use a new battery if possible.
3. While the batteries are low, press and hold the power button for at least 30 seconds.
4. Release the power button.
5. Replace batteries.
6. Press and hold the Play/Pause and Back buttons to begin the reconnection process.

Once done, Turn the remote control on the Samsung TV sensor.

Press and hold the Back and Play/Pause buttons at the same time for at least three seconds.

Your Samsung TV will start syncing with the remote control.

You will see a message that you have connected the remote control to the Samsung TV.

IF THE SAMSUNG TV REMOTE IS NOT WORKING AND STARTS FLASHING RED, THERE ARE SEVERAL WAYS TO FIX IT:

Restart your TV as described in procedure 1 above.

PROCEDURE:

1. Turn off the TV.
2. Switch off the device.
3. Wait about 30 to 40 seconds.
4. Reconnect your TV.

If the above does not work, please reset the remote control.

Start by removing the batteries from the case. Press and hold the power button for ten seconds.

Change the batteries and try using the remote control.

SUMMARY:

If your Samsung TV remote is not working, there are several ways to fix or fix the problem.

Start by changing the batteries, cleaning the top edges of the remote control, and checking the connections. You may also want to reconsider the remote if you have a flashing red light issue.

You can also fix a non-working touchpad by calibrating the device from time to time.

Note: You can use the Samsung Smart Things app to control your Samsung TV with your phone or compatible keyboard and mouse while applying these troubleshooting tips.